To content
Reduce the pressure, go for particle velocity
Sensors & Probes

PU Match

Small yet powerful, the PU Match sound intensity probe

The PU Match, the smallest and the newest addition to the PU family is packed with all the abilities of the PU Regular to measure sound pressure and particle velocity physically at the same point in one compact probe. Optimized design of the PU Match allows it to handle measurements that demand high spatial resolution but has space limitations. Give your product an edge by unleashing the complete potential of a PU probe to visualize & localize your sound sources.

Features

  • Broad Band | 20Hz -10kHz
  • Compact design
  • High spatial resolution
  • Low susceptibility to P/I
  • Less dependent on environment conditions

Applications

  • Sensor array applications
  • Noise Source Identification
  • Configurable grids for Near Field Acoustic Camera
  • Range of Acoustic quantities: Sound Intensity, Sound Power, PVL measurements

Thorough sound field analysis with high spatial resolution

The Microflown PU probe is able to simultaneously measure multiple acoustic properties such as sound pressure and particle velocity at any point of a sound field. As the only probe that can directly capture the complex acoustic behavior present in the near field, detailed acoustic information becomes easily available to accurately find and quantify the acoustic output of multiple sound sources. The broadband response of the probe covers the complete frequency range from 20 Hz to 10000 Hz, without the need of introducing any assumptions or computational errors.

Sound intensity probe with two sensors embedded in one probe

The PU Probe, a sound intensity probe that combines two sensors: a traditional microphone and a Microflown. The working principle allows the operation of the probe in-situ in real operating conditions without the need for special acoustically treated environment. The sensor is applicable in wide range of scenarios like reverberant conditions, closed cavities e.g. vehicle interiors, to carry out measurements to study the sound field, localize the sound sources or the contribution to a particular position. The probe orientation in 0 or 90 degrees adds versatility to your measurement campaigns.

Specifications

Sensor performance Sound Pressure | Particle Velocity
Sensitivity 20 mV/Pa | 10 V/(m/s)
Frequency Range (±1 dB) 80 - 8000 Hz
Frequency Range (±2 dB) 20 - 10000 Hz
Maximum Level 130 dB
Noise floor (20 Hz - 2 kHz) 26 dB(A) | 35 dB(A)
Noise floor (20 Hz - 10 kHz) 29 dB(A) | 43 dB(A)
Environmental Sound Pressure | Particle Velocity
Temperature range -20 to 85 °C
Temperature Coefficient 0.015 dB/°C | 0.006 dB/°C
Influence of Humidity (30 - 90%) 0.001 dB/%RH | 0.06 dB/%RH
Static Pressure Coefficient < 0.5 dB/kPA
Maximum airflow < 0.5 m/s
Physical dimensions
Connector type 4 pin LEMO
Weight 5 g
Diameter 7 mm
Length 58 mm
Reduce the pressure, go for particle velocity

Cookie-settings

Microflown uses cookies to ensure an optimal user experience.

We would like to ask your permission to place cookies.

More information.