Info

The power input voltage of all modules of the DATaRec 4 system is 17 V - 28V. Each module generates the different internal required voltages. The Power Module converts the input voltages to the 24V system voltage.

Within each chain of Signal Modules at least one Power Module must be integrated, since the Link Module does not pass the supply voltage throughout to its other link connectors. Power Modules are available for AC as well as for DC supplies.
 

The 9 – 36 voltage Power Module can support 50 watts. If a combination of Signal Modules and Link Modules request higher power consumption, than more than one Power Modul can be integrated in a chain.

For decentralised system configurations Power Modules with repeater functionality are available. In this case the Power Module routes also the data to the Link Module. Parallel integrated Power Modules avoid voltage drops typical in larger installations.

Specs

Input Power : 9 - 36 V DC
Max Power : typically 50 W
Functions : EMI filter, galvanic isolation
Connector : 1 x 2 pin LEMO DC in, 2 x 6 pin LEMO (Link)
On/off switch : yes
LED indicators : for Power on
Dimensions : 48,1 x 184 x 124,5 mm (w x h x d) including fixing system
Weight : 940 g typical

Environmental specifications:
Vibration : 5g
Shock : 10g
Operating temp : -30°C - +65°C
Storage temp : -40°C - +90°C
Humidity : 0 - 95% relative, non-condensing